Rinnai Sunmaster solar with gas back up
A solar split system is where only the solar collector panels sit on the roof and the storage tank is located at ground level.
A small pump circulates the water from the tank through the panels to collect the heat energy from the sun.
Rinnai Prestige Gas Boosted Split System
- Split System - Storage Cylinder installed ground level with Collectors mounted on the roof
- Continuous flow gas booster powered with the same technology as the Rinnai INFINITY
- Specifically designed for solar ensuring maximum heat retention thus reducing the need for boosting
- Do not require a sacrificial anode saving on maintenance costs
Excelsior Solar Collectors
- Highly efficient all copper Collector with a Tinox surface maximising energy from the sun
- 10 Riser tubes per panel for effective transfer of the solar energy to heat the water
- Full aluminium casing for corrosion resistance
- Fully replaceable glass
- Available in both standard and frost tolerant (FTC) versions
With 5 solutions available...
Specifications
- Dimensions
- Height: 1530 mm
- Width: 515 mm
- Depth: 709 mm
- Weight (kg): 66
-
- Cold Water inlet: 225 mm (20 mm)
- Hot Outlet: 1310 mm (20 mm)
- PTR Valve Setting (kPa): 1000
- Max supply pressure with ECV (kPa): 680
-
- Booster Size: Refer to seperate Booster page
-
- Insulation: High density CFC Free polyurethane
- Hot Return: 1310 mm (20 mm)
- Inner Construction: Vitreous enamel
- Outer Construction: Colorbond
- Solar Collector Specifications: Refer to Download section for Specification Table
Downloads, Links and Knowledge Articles